C1 | World C The Talos Principle Guide

The Conservatory (red)

Access to the blue transmitter.

Open the red door and walk to the other side, link the connector with the transmitter through the hole in the wall and gain access to the blue transmitter.

The blue beam must remain on the inside of the red one.

Connect the red and blue beam with a single connector. The blue beam must be on the inside of the red laser, as shown on the picture.

Blowback (red)

With the help of hexahedron you will get the jammer.

Use the hexahedron to get the jammer. Walk to the other side of the level with the jammer. Open the main central door with the connector, hold them with jammer and move the connector to the other side.

Hexahedron will fly to the other side.

Use the jammer to open the red door with fan inside and place the hexahedron on it. Aim the jammer at the middle door and use the connector to activate the fan as shown on the picture. The hexahedron will fly to the other side.

Stopped fan.

Walk to the left part of the level and stop the fan with the jammer. Go to the hexahedron and place it on the red button.

Labyrinth (red)

Walk slowly near the ball.

Take the jammer, walk slowly near the ball and get the key. Open the middle door and take the jammer with you.

This is where the actual labyrinth begins.

Open another door that leads to next jammer. Take it while avoiding two balls on the sides. Get all three jammers out with the basic method of using two jammers on single door.

All three jammers are required.

You will need all three free jammers till the end. Use two of them on the turrets and third on the door that leads to the sigil.

Multiply Impossible Ascension (red)

Items needed in this level.

Demount the fan and place it on the red button, get the connector and hexahedron. Open the red door found in the further part of the location with the connector and place the hexahedron under the wall with the second hexahedron. Thanks to that you will get two new cubes.

From this altitude the door will open.

When you will have three hexahedrons, place one of them on the fan, then put on it the connector linked with the transmitter, fan and doors before the sigil. When the fan will start working, add hexahedrons to the construction until you well get the right altitude to open the door, as shown on the picture.