Adjust the heaters | 11: Signal Hunting Dead Space 3 Guide

Last update: 11 May 2016

Now you can leave through the door that has been locked before. Take the lift to return to the facility's main hall, where there is the examination subject. You will receive a note that, although the generator is online, the creature does not unfreeze. Approach the four heaters.

To set the heating to maximum, you need to remove the heaters in the correct sequence. After you activate the panel, you should notice that above both the current temperature gauge, and the knobs, one of the digits went alight- this indicates which knob needs to be turned up . By using kinesis on the big knobs, unscrew the heaters one after another to achieve the maximum possible heating level.

Rendezvous with Santos

Go towards the lift, right next to the workbench near the entrance to the facility. You will find Santos there, who will fill you in on the whereabouts of the parts necessary to build the probe, and give you blueprints [Probe Gun].