Order 5 - Salem Kieran | Car Mechanic Simulator 2018 Walkthrough Car Mechanic Simulator 2018 Guide
Last update: 02 July 2019
The fifth story order in Car Mechanic Simulator 2018 requires you to work on Salem Kieran. This chapter contains descriptions of actions you have to perform during this order.
Shopping List
The list of parts:
- Brake Pads 4x
- Rubber Bushing 10x
- Solid Axle Control Arm 2x
- Wheel Hub Cap 2x
- Brake Caliper 2x
- Outer Tie Rod 2x
- Inner Tie Rod 2x
- Brake Disc Ventilated 2x
- Solid Rear Drive Axle 2x
- Steering Rack
- Front Suspension Crossmember
Walkthrough
Reach level 5 to unlock this order. Here, you must make numerous changes in the suspension, both front and rear, as well as fix the braking system. Taking off the suspension crossmember, located under the engine, is something that you haven't done before.
In order to do it you must first take out four rubber bushings. Two similar bushings, that are easy to miss, are located on the joint that connects the solid axle control arm with the bodywork (in the hole of that part). The rear of the car also requires you to change the solid rear drive axle. To reach it you need to dismount the wheels and brakes from the rear axle. You can take it out only after taking off the brake disc.
There is one additional part that you can miss - the wheel hub caps. You mount them in the middle of the brake disc's opening, where the bearing is.