Breathedge: Habitation Module - walkthrough, Chapters 4 & 5 Breathedge guide, walkthrough

Last update: 09 September 2021

In this part of our Breathedge guide you'll find info regarding the "unknown module" - that is, the Habitation Module visited in Chapter 4.

• Investigate the dome
• Create a saw drill
• Explore the shuttle

Investigate the dome

Fly to the next module, indicated by a marker in the upper area of the map. The docking station is located on right, on the black wall.

You'll end up in the Habitation Module. At the end of the wide hallway, near the piano, you'll find a Navigation Chip.

Behind another narrow corridor, in the room on the left (1), you'll find an air filteron the floor, in the corner. Walking down the hallway and sticking to the left, you'll find another Navigation Chip. Yet another one can be found in the next room, by the coffin-bot. Remember - you need four filters and four navigation chips; you can ignore the rest once you find them.

Create a saw drill

Finally, in the last corridor you will find a door with an orange frame. There's a casing next to it, containing the saw drill blueprint. To make this turn you need to return to the ship. Collect the necessary materials on the way:

1. Titanium x2,
2. Battery,
3. Thick Insulation Tape x2,
4. casing.

Explore the shuttle

Now you need reach the shuttle in the final room. While heading to the shuttle dispatch a robot to obtain the last required Navigation Chip. Reach the control room at the end. To bypass the turrets, just run next to them towards your objective. Once you get there, short-circuit the electric box.

Inside the shuttle you will find:

1. An air filter,
2. Lycoplasma (You'll need one of them to build an air filter),
3. Anti-Asteroid Protection (blueprint), on the left to the ship's wheel (examining the console is not enough - use the Grabber to extract some Microplasm; you need two of these, you can find more in the shuttles at the Police Module).