Inside Juno labs - Ed and Bennet Resonance Guide

Last update: 11 May 2016

Inside Juno labs-Ed and Bennet

In the building, drag the Monkey wrench from INV on Bennet to give it to him. Now drag the Screwdriver on the Ventilation access (square).

When you open the ventilation access, go in there as Ed (click on the opened Ventilation access) - Inside Juno labs-Ed and Bennet - Walkthrough - Resonance - Game Guide and Walkthrough

When you open the ventilation access, go in there as Ed (click on the opened Ventilation access). Move right towards the water leak (LMB on Water leak). In the menu, switch to Bennet. Use the Monkey wrench on the Valve (circle). Select Turn it to the right. The water flow will be changed. Switch back to Ed.

In the shaft, click on the Rusty pipe to remove it - Inside Juno labs-Ed and Bennet - Walkthrough - Resonance - Game Guide and Walkthrough

In the shaft, click on the Rusty pipe to remove it. Drag the Pipe you've found in the subway in the place of the removed one (Missing pipe). Use the Duct tape in the same place. Switch back to Bennet.

Use the Monkey wrench on the Valve again, but this time select Turn it to the left - Inside Juno labs-Ed and Bennet - Walkthrough - Resonance - Game Guide and Walkthrough

Use the Monkey wrench on the Valve again, but this time select Turn it to the left. As Ed, exit the shaft. In INV, move the Screwdriver on the Fuse box. When you open the flap on the box, click LMB on the Fuse box again.

Now click LMB on the Panel to approach it - Inside Juno labs-Ed and Bennet - Walkthrough - Resonance - Game Guide and Walkthrough

Now click LMB on the Panel to approach it. Click on the Panel cover to open the flap.

Drag the Screwdriver over the panel's screws (Screw - circle) to remove the panel.

Begin by pressing the Power switch (rectangle on top) - Inside Juno labs-Ed and Bennet - Walkthrough - Resonance - Game Guide and Walkthrough

Begin by pressing the Power switch (rectangle on top). Remove the Burned wire (upper arrow). Drag the Loose wires (lower arrow) on the Primary pin (circle) and click LMB to hook them.

Now you need to direct the wire the way it's presented on the screen - Inside Juno labs-Ed and Bennet - Walkthrough - Resonance - Game Guide and Walkthrough

Now you need to direct the wire the way it's presented on the screen. To leave the wire on the Pin, you need to move it around it. When you do it, press the Power switch. The door will be opened.

Talk to Bennet and select Follow me - Inside Juno labs-Ed and Bennet - Walkthrough - Resonance - Game Guide and Walkthrough

Talk to Bennet and select Follow me. Enter the door leading to Morales' lab.

Place the Metal beam in STM and use it in the conversation with Bennet (or you can simply drag the Metal beam on Bennet) - Inside Juno labs-Ed and Bennet - Walkthrough - Resonance - Game Guide and Walkthrough

Place the Metal beam in STM and use it in the conversation with Bennet (or you can simply drag the Metal beam on Bennet). When the detective lifts the metal piece, pick up the Book which was crushed under it.