Observation: Jim Elias - walkthrough, level 7 Observation guide, walkthrough

Last update: 25 June 2020

In this part of the walkthrough to Observation, you will learn how to use COMMAND TERMINAL and how to perform EMERGENCY FLUSH in the LIFE SUPPORT TERMINAL.

Authorize Jim's voice. Click on SCRAPE ACCESS POINTS. A small square will appear on the screen. Keep pressing the left mouse button on it until the pattern around the square is filled. Act similarly with the following squares until all of them have their interior filled and the network is refilled. Click on one of the three CONNECT and you will be taken to SPHERE in RUS-04.

Connect to the computer located there and read the message from Stanislav (SL-JR - EXPERIMENTAL BOOSTS!). Restore the files EXPERIMENTAL BOOST HVC and EXPERIMENTAL BOOST COMPILER HVC. Combine them in SAM's memory and you will receive EXPERIMENTAL FIRMWARE FLASH LOG.

Point the camera at the door. Keep pressing the left mouse button until the BOOST bar is filled. Once it happens, release the button. The SPHERE will hit the door and open it. Go left, then right. Follow the corridor ahead and then turn right. Then, turn right again until you reach module RUS-06. Find the ventilation shaft, drive towards it and hit the entrance similarly as you did with the door. Go through the shaft to its end and tear out the ventilation bars in order to leave the corridor. You will find yourself in module RUS-03. Turn left, then left again, and drive to RUS-01. Be careful, Jim will be there. Wait until he moves to another room and starts talking with the central.

Go further down the corridor and turn left, you will be in RUS-01. Then, turn right and pass through the dark corridor to UN-05. Read Emma's message on the laptop (EF-JR - PERSONAL) and go to UN-06.

Find the ventilation and break the bars. Use the shaft to reach module ULC. Go down the corridor to UC-01.

Jim will be in UC-01. Enter the room above and connect to the device SAM INTERFACE. Hold R and send the notification to the central.

Go to the CREW TRACKER in SAM's system. Click on Jim Elias and deliver information - first his VITAL STATISTICS and then his LOCATION. Go to the maps and connect to the cameras in RUS-06. Point the camera on Jim's body. Hold R and inform the central about his location. Go back to the CREW TRACKER in your system and this time, report the position of Emma Fisher. Then, report her health. In your system, go to COMMUNICATION. Click on INCOMING and open the third message.

Connect to the cameras in module UC-02 and login to COMMAND TERMINAL. Click on D-76, then on number 5, and on VALIDATE. Then, click on E-43, on number 2, and on VALIDATE. Finally, click on H-62, on number 9, and on VALIDATE. Leave the device by pressing BACKSPACE. A black hexagon will appear once again. Press P to start the sequence of symbols repeating.

Hold R and click on the UNKNOWN sign. You will find yourself in UC-01. Connect to the LIFE SUPPORT TERMINAL behind Jim. Click on the RUN AUTHORISATION DECRYPTION. Keep pressing R for the numbers to appear. Enter the code 140412. Hit BACKSPACE to exit.

You will have to block all three hatches in the UC-01 module. Connect one by one with each HATCH CONTROL, close the hatch, and then go to the schematics while holding the right mouse button. Type in the diagram number L4.

Login back to LIFE SUPPORT TERMINAL. Click on TOGGLE, and then on EMERGENCY FLUSH.