Gyrosphere Valley | Jurassic World - walkthrough LEGO Jurassic World Guide

Last update: 11 May 2016

First of all, you need to make t to the main gate. To do that, you need to follow the turquoise studs. This way, you reach the location shown in the screenshot.

To make it across the gate, you need to switch to Mitchell and squeeze through the shaft in the wall, on the left. Inside, approach the control panel and unlock the door for the gyrosphere operator. Hang both characters up on levers to open the next door and make it into the valley.

As the gyrosphere operator, approach the blue containers and destroy them and use the scattered bricks to build the control panel. While controlling the dinosaur, walk up to the orange pillars and smash them with the special ability, then fight for your territory with the opponents.

Again, follow the path of the turquoise studs that lead up to your destination. After you get there, switch to the gyrosphere operator and fix the control panel.

While riding the gyrosphere, follow the track of the turquoise studs, up to your destination. After you get to the gate, take the ramp (it is on the right), to get onto the scaffolding, and ride onto the mechanism in the center and open the seal of the main gate. After you destroy the seal, take the ramp in the middle to hit the button, which in turn opens the main gate.

After a short chase, cut to Mitchell and ride up to the blue containers in the middle. After you smash them, use the bricks to build a platform and ride the gyrosphere onto it to release the bees, against the tyrannosaur. During the fight with the tyrannosaur, tap the buttons that display on the screen, at the appropriate moments.

After you have destroyed the pole, ride up to it and build a platform for the gyrosphere, which will make it possible for it to get to the higher level; then go right. On the right, there is a small tunnel in the tree trunk. Smash the objects in the way and use Mitchell's special ability to get to the higher level. Use the lianas hanging down from the tree, jump left and tale the tyrannosaur's picture. After you have smashed the LEGO element, use the bricks to build a ramp for the gyrosphere and ride on to the next section.

Build three LEGO objects, make it over to the other bank, with the gyrosphere operator and as Mitchell build a ramp for it. While on the gyrosphere, jump onto the catapult and launch the stone that blocks the access to the mechanism. Jump onto it, in the gyrosphere, to be able to proceed to the next section.

As Mitchell, approach the white bricks on the left and build a crane handler. While controlling the crane, with the gyrosphere, grab the car on the right and direct it over the head of the tyrannosaur.